Height of string at first fret

Depending on the thickness of the pencil line, 5mm, you can file a slot to the top of the line Then check for height of string above the

Height of string at first fret What you want to achieve is a nut slot depth that will allow the string to poroperly clear the frets when playing the string open (not buzzing

Depending on the thickness of the pencil line, 5mm, you can file a slot to the top of the line Then check for height of string above the

coinomania slot Actually the best way to think of the nut slot depth is in relationship to the string action height at the first fret and 12th fret Most

The G0's nut slots are deeper Therefore, only a bit of the low E string is sitting above the nut There is about 1mm at the nut between bottom

nut slot height 1 Measure the height of the first two frets by laying a straight edge across them and sliding different combinations of feeler gauge blades under it until they

nut slot being cut too low I've found a few common specs online for setting bass nut slot height, and my measurements are consistently